Identification Printer & Software Support

We have over 35 years of experience with on-site identification systems and software
Largest "in-the-field" technical support team for TE Connectivity identification printing systems
Remote support is available using online screen sharing applications such as TeamViewer and Quick Assist

**The TE Connectivity website also contains the following downloads :**

WinTotal v7.x.xx (latest version)
WinTotal v6.1.16
WinTotal v5.4.04
Printer firmware updates
The latest TE printer drivers
Click here to visit the TE Connectivity WinTotal Support Page

**You can install WinTotal and download expressMARK updates using the links below :**

Wintotal Software v7 + USB Unlock Dongle in orange box

Buy Wintotal Labelling Software End User Licence & USB Unlock Dongle

WinTotal v5.2.09 Installation Files

Download our installation guide and follow the simple step-by-step instructions.
It is important to follow these steps in the correct order to ensure a successful installation.

Step 1 - Download and print off the step-by-step installation guide
Step 2 - Download, unzip and install the printer driver for your printer
Step 3 - Download and install WinTotal v5.2.09
Step 4 - Download, unzip and copy the expressMARK v5 update files to the correct folder on your PC

Step 1 - Installation Guide

Step 2 - Printer Drivers

Step 3 - WinTotal v5.2.09

Step 4 - expressMARK v5

WinTotal v5 User Guide

Temp Driver

WinTotal v6.1.16 Installation Files

Download the TE installation guide and follow the step-by-step instructions.
Important note : to run this version of WinTotal you require a USB unlock dongle.

Step 1 - Download and print off the step-by-step installation guide
Step 2 - Download, unzip and install the printer driver for your printer
Step 3 - Download and install WinTotal v6.1.16
Step 4 - Download, unzip and install the expressMARK update file to the correct folder on your PC

Step 1 - Installation Guide

Step 2 - Printer Drivers

Step 3 -WinTotal v6.1.16

Step 4 - expressMARK v6

WinTotal v6 User Guide

WinTotal v7.2.01 Installation Files

Important note : to run this version of WinTotal you require a USB unlock dongle.

Step 1 - Download and install WinTotal v7.2.01 (this also includes the printer driver installation)
Step 2 - Download, unzip and install the expressMARK update file to the correct folder on your PC

Step 1 - WinTotal V7.2.01

Step 2 -expressMARK v7

WinTotal v7 User Guide

Rail Sector UDL Files for WinTotal

Please note these User Defined Layout (UDL) files are specific to rail sector customers.
You should consult a member of our Ident Technical Support team prior to installing this update.
The files contain specially designed product layouts for use with HX-SCE sleeves and ETC tie-on markers.

* Step 1 - Close WinTotal if currently open on your PC
* Step 2 - Download, unzip and install the Arial Monospaced font to your PC
* Step 3 - Download, unzip and install the WinTotal UDL update file to your PC

Step 1 - Arial Monospaced